M2M AD301 User Manual download pdf (Page 21)

USER MANUAL PrestoAdvancedAD101_AD301_UG_000_UK

Descriptions and non-contractual illustrations in this document are given as an indication only.

M2M Design reserves the right to make any modification

If your SIM Card credit is too low, the PRESTO Advanced Router will performed periodically

connect/disconnect actions.

WAN Settings(advanced)

Label

Description

Enable

This field specifies if Advanced WAN settings is enabled at the PRESTO

Advanced Router.

Accept Local IP

Address

With this option, pppd will accept the peer's idea of our local IP address, even if

the local IP address was specified in an option.

Accept Remote IP

Address

With this option, pppd will accept the peer's idea of its (remote) IP address, even

if the remote IP address was specified in an option.

Idle time before

disconnect ( sec)

Specifies that pppd should disconnect if the link is idle for n seconds. The link is

idle when no data packets are being sent or received.

Refuse PAP

With this option, pppd will not agree to authenticate itself to the peer using PAP.

Require PAP

Require the peer to authenticate using PAP (Password Authentication Protocol)

authentication.

Refuse CHAP

With this option, pppd will not agree to authenticate itself to the peer using

CHAP.

Require CHAP

Require the peer to authenticate using CHAP (Challenge Handshake

Authentication Protocol) authentication.

Max. CHAP challenge

transmissions

Set the maximum number of CHAP challenge transmissions to n (default 10).

CHAP restart interval

sec

Set the CHAP restart interval (retransmission timeout for challenges) to n

seconds (default 3).

Refuse MS-CHAP

With this option, pppd will not agree to authenticate itself to the peer using MS-

CHAP.

Refuse MS-CHAPv2

With this option, pppd will not agree to authenticate itself to the peer using MS-

CHAPv2.

Refuse EAP

With this option, pppd will not agree to authenticate itself to the peer using EAP.

Connection debugging

Enables connection debugging facilities. If this option is selected, pppd will log

the contents of all control packets sent or received in a readable form.

Maximum Transmit

Unit ( bytes)

Set the MTU (Maximum Transmit Unit) value to n. Unless the peer requests a

smaller value via MRU negotiation, pppd will request that the kernel networking

code send data packets of no more than n bytes through the PPP network

interface.

Maximum Receive

Unit (bytes)

Set the MRU (Maximum Receive Unit) value to n. Pppd will ask the peer to send

packets of no more than n bytes. The value of n must be between 128 and 16384;

the default is 1500.

VJ-Compression

Disable Van Jacobson style TCP/IP header compression in both directions.

VJ-Connection-ID

Compression

Disable the connection-ID compression option in Van Jacobson style TCP/IP

header compression. With this option, pppd will not omit the connection-ID byte

from Van Jacobson compressed TCP/IP headers.

Protocol Field

Disable protocol field compression negotiation in both directions.

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 72 73

Comments to this Manuals

No comments

M2M AD301 User Manual Page 21

Comments to this Manuals

Related products and manuals for Networking M2M AD301